MAX FLEXAIR SOURCE CAPTURE ARMS INSTALLATIONS

The MAX FLEXAIR source capture arm has been designed without the restrictions of cables and springs that impede most arms from tight maneuvers such as the one being demonstrated in the photo.

The MAX FLEXAIR patented design ensures positive positioning and ease of movement through a counter-weighted forearm and balanced gas springs at the shoulder joint.

Shown in the photo above are two FLEXAIR arms mounted back to back on a center post and ducted to a centralized exhaust system.

Depicted in the photo above are a series of FLEXAIR arms ducted to a central system.

Should an extended reach be required, FLEXAIR arms can be mated with pivoting extension booms as shown above.

Multiple arm installation ducted to a 24-cartridge filter unit at the exterior of the building.

The high degree of flexibility allows the FLEXAIR arm/boom to fold out of the way when not in use or when overhead cranes or lift trucks are placing work in the welding space or on the work table.

Overall customer satisfaction

A complete assembly including arm/boom and fan/motor are shown.

Fully retractable, the FLEXAIR is well suited for tight spaces.

Shown above are 4-inch diameter arms which the latest addition
to the FLEXAIR product line.